Why have an epoxy garage flooring? Ordinary garage flooring are just basic gray concrete. More than time, stains from grease, oils, and substances result in plain gray concrete to grow to be an unpleasant eyesore. Obtaining an epoxy garage flooring coating will give you years of provider, longevity and will resist most stains as effectively as supply you with a beautifully, completed area to maintain the price of your home.

The Most Common Epoxy Ground Coating Methods

There are three frequent techniques available that will enhance your garage ground:

one. Epoxy & Polyurethane Strong Colour Technique

2. Epoxy Chipstone (partial vinyl chip broadcast) with Polyurethane Top Coat Method

three. Epoxy Granitex (100% vinyl chip broadcast) with Polyurethane Leading Coat Method

Hold in head that with these a few epoxy techniques, you have ‘good’, ‘better’ and ‘best’ varieties of epoxy garage ground methods.

The Excellent Method

The epoxy polyurethane reliable coloration technique will final around 5-7 many years, maintenance free of charge, but will demand a maintenance coat of pigmented polyurethane. This garage ground coating is generally a two-coat, slender film method ranging in thickness from four-20 mils. epoxy garage floor kansas city is used by roller or airless sprayer.

The Much better Method

The epoxy Chipstone method will final around seven-twelve a long time, maintenance free prior to needing a maintenance coat of clear polyurethane. This epoxy garage flooring system usually is composed of one pigmented primer coat of epoxy a pigmented colour coat with a partial/light broadcast of vinyl chips into the damp epoxy and a single coat of very clear polyurethane for defense. The thickness is roughly 20-thirty mils.

The Ideal System

The epoxy Granitex technique can last as long as twelve-15+ several years, routine maintenance free of charge prior to needing a routine maintenance coat of polyurethane. This epoxy flooring coating is typically one pigmented primer coat a pigmented color coat with a one hundred%/full broadcast of vinyl chips and two coats of obvious polyurethane.


Suitable area preparing is important to the lengthy term success of the installation. All surfaces to be coated have to be cleaned of contaminants which might interfere with bonding. Concrete need to be acid-etched, shot-blasted or diamond-floor to attain a profile equivalent to one hundred twenty grit sandpaper. After planning, the concrete floor must be inspected for holes and cracks. If holes or cracks are widespread, then patchwork need to be done. As soon as planning is comprehensive, set up is completely ready to begin.

Installation of Granitex Epoxy Garage Ground Program:

one. Surface area planning, patchwork and roll one coat of pigmented epoxy primer.

two. Soon after epoxy primer is dry, examine, prep and roll 1 coat of pigmented epoxy over primed location. Operate in 10×10 or 12×12 sections at a time. Whilst epoxy is soaked, broadcast vinyl chips into moist epoxy. Be certain the location receives a hundred% protection. When all sections are totally protected, let dry extensively.

3. After all sections are dry, scrape, sweep and vacuum all excessive Granitex vinyl chips from the area. Apply a slim coat of polyurethane to lock and lay vinyl chips down.

four. When the polyurethane is dry, apply a second coat for a closing prime coat. As an selection, non-skid resin sand can be extra to increase the slip resistance.

All epoxy garage ground coatings can be simply cleaned with delicate, liquid detergents then mopping, hosing or even “swiffering”. Grease, oils, and most chemical substances will not stain or absorb into the epoxy coated flooring.

Leave a Reply

Your email address will not be published. Required fields are marked *